Scuba Fins (Beginner)
Scuba fins allow you to swim faster while in water but make you walk much slower while on land.
These are the easiest scuba fins to make, but the lowest level of three levels of scuba fins. The other two levels are:
- Scuba Fins (Intermediate)
- Scuba Fins (Advanced)
These are made with higher level polymers.
The scuba fins are equipped in the boots slot in your inventory.
The scuba fins are made by putting 16 Bags (PolyIsoPrene Pellets) into the hopper of the injection molder with a water bucket and a scuba fin mold, which is shown further below (see Machining Mill - Scuba Fins). .
The mold can be made using Bronze Ingots, Cobalt Ingots, Stainless Steel Ingots, Antimony Ingots, Nichrome Ingots, Magnesium Ingots, Nickel Ingots, Bismuth Ingot, Tungsten Ingots, Titanium Ingots, Brass Ingots, Tungsten Carbide Ingots, Platinum Ingots, Manganese Ingots, Aluminum Ingots, Steel Ingots, or Antimony-Lead Ingots.
Only one kind of ingot can be used for each mold. .
|Polymer Pellets||Bag (PolyIsoPrene Pellets)|
|Crafting Duration (sec)||10|
|Max Stack Size||1|