Repeater Bypass Tutorial

From PolyCraft World
Jump to: navigation, search

State1.png

In the image above, the light is off, and both levers are off.

State2.png

In this image, the lever turns on the light. This is the light that gets bypassed by the second repeater's signal.

State3.png

As pictured here, the signal from the second lever alters the first repeater.

State4.png

By turning on the first lever again, we can allow the repeater to hold the signal.

State5.png

Turning off the first levers sustains the signal, since the second repeater's signal is effecting the first repeater.