Difference between revisions of "3D Scanner"

Revision as of 15:03, 6 October 2021

Description

The 3D Scanner can scan a volume starting at 5x5x5 blocks to make a blueprint of the structure inside the scanned area. A 3D Printer can use the blueprint from a 3D Scanner to print the scanned structure over and over... and over again! 3D Scanners can be upgraded with modules to increase the allowable scan size. See the upgrade section below.

External

3D Scanners from handheld devices to industrial grade.

Recipes

Outputs	Components	Recipe
3D Scanner	Beacon Paper (8) Heat Exchanger Block of Redstone Regulator (Low Pressure) Hard Metal (e.g. Block of Iron) (2) Structural Truss (16)	8 16

3D Scanner GUI Mechanics

1. Open Scanner GUI	2. Name Blueprint	3. Fuel Scanner	4. Scan Build Area	5. Take Blueprint

Upgrades

1. Blue Scanner Module (8x8x8)	2. Yellow Scanner Module (10x10x10)	3. Red Scanner Module (12x12x12)

3D Printer

Back to the BEST Robotics Polycraft 3D Printing Challenge Main Page

@@ Line 61: / Line 61: @@
 ! 3. [[Red Scanner Module]] (12x12x12)
 |-
-| [[File:Blue_scanner_module(8x8x8).png|alt=Intermediate Upgrade|333px|Enables a build area that is 2 block longer and wider than the default scanner.]]
+| [[File:Blue_scanner_module(6x6x6).png|alt=Intermediate Upgrade|333px|Enables a build area that is 2 block longer and wider than the default scanner.]]
-| [[File:Yellow_scanner_module(10x10x10).png|alt=Pro Upgrade|333px|Enables a build area that is 4 blocks longer and wider than the default scanner.]]
+| [[File:Yellow_scanner_module(8x8x8).png|alt=Pro Upgrade|333px|Enables a build area that is 4 blocks longer and wider than the default scanner.]]
-| [[File:Red_scanner_module(12x12x12).png|alt=Advanced Upgrade|333px|Enables a build area that is 6 blocks longer and wider than the default scanner.]]
+| [[File:Red_scanner_module(10x10x10).png|alt=Advanced Upgrade|333px|Enables a build area that is 6 blocks longer and wider than the default scanner.]]
 |}