Scuba Fins (Beginner)
Description
Scuba fins (Beginner) allow you to swim faster while in water but make you walk much slower while on land.
Recipes
The scuba fins require natural rubber acquired from a Tree Tap, an Injection Molder, and a Machining Mill.
Injection Molder
The scuba fins are made by putting 16 Bags (PolyIsoPrene Pellets) into the hopper with a water bucket and a scuba fin mold, which is shown below. .
Outputs | Components | Recipe |
---|---|---|
Machining Mill
The mold can be made using Bronze Ingots, Cobalt Ingots, Stainless Steel Ingots, Antimony Ingots, Nichrome Ingots, Magnesium Ingots, Nickel Ingots, Bismuth Ingot, Tungsten Ingots, Titanium Ingots, Brass Ingots, Tungsten Carbide Ingots, Platinum Ingots, Manganese Ingots, Aluminum Ingots, Steel Ingots, or | Antimony-Lead Ingots.
Only one kind of ingot can be used at one time. .
Outputs | Components | Recipe |
---|---|---|
Properties
Name | Value |
---|---|
Polymer Pellets | Bag (PolyIsoPrene Pellets) |
Crafting Pellets | 16 |
Crafting Duration (sec) | 10 |
Max Stack Size | 1 |
"VelocityInWater | 0.2 |
VelocityOnGround | 0.025 |
Durability(MCMins)" | 20 |
Release Version | 1.0.0 |