Difference between revisions of "Scuba Fins (Beginner)"

From PolyCraft World
Jump to: navigation, search
(Description)
(Recipes)
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Description==
 
==Description==
Scuba fins (Beginner) allow you to swim faster while in water but make you walk much slower while on land.
+
Scuba fins allow you to swim faster while in water but make you walk much slower while on land.
 +
 
 +
These are the easiest scuba fins to make, but the lowest level of three levels of scuba fins. The other two levels are: <br />
 +
-[[Scuba Fins (Intermediate) | Scuba Fins (Intermediate)]] <br />
 +
-[[Scuba Fins (Advanced) | Scuba Fins (Advanced)]] <br />
 +
These are made with higher level polymers.
 +
 
 +
The scuba fins are equipped in the boots slot in your inventory.
  
 
==Recipes==
 
==Recipes==
The scuba fins require polyisoprene (natural rubber) acquired from a [[Tree Tap | Tree Tap]], an [[Injection Molder | Injection Molder]], and a [[Machining Mill | Machining Mill]].
+
The beginner scuba fins require [[Bag (PolyIsoPrene Pellets)| natural rubber]] acquired from a [[Tree Tap | Tree Tap]], an [[Injection Molder | Injection Molder]], and a [[Machining Mill | Machining Mill]].
  
 
===Injection Molder===
 
===Injection Molder===
The scuba fins are made by putting 16 [[Bag (PolyIsoPrene Pellets) | Bags (PolyIsoPrene Pellets)]] into the hopper with a water bucket and a [[Mold (Scuba Fins) | scuba fin mold]], which is shown below.
+
The scuba fins are made by putting 16 [[Bag (PolyIsoPrene Pellets) | Bags (PolyIsoPrene Pellets)]] into the hopper of the injection molder with a water bucket and a [[Mold (Scuba Fins) | scuba fin mold]], which is shown further below (see [[#Machining Mill | Machining Mill - Scuba Fins]]).
 
.
 
.
 
{| class="wikitable sortable collapsible"
 
{| class="wikitable sortable collapsible"
Line 23: Line 30:
  
 
===Machining Mill===
 
===Machining Mill===
The mold can be made using [[Bronze Ingot | Bronze Ingots]], [[Cobalt Ingot | Cobalt Ingots]], [[Stainless Steel Ingot | Stainless Steel Ingots]], [[Antimony Ingot | Antimony Ingots]], [[Nichrome Ingot | Nichrome Ingots]], [[Magnesium Ingot | Magnesium Ingots]], [[Nickel Ingot | Nickel Ingots]], [[Bismuth Ingot | Bismuth Ingot]], [[Tungsten Ingot | Tungsten Ingots]], [[Titanium Ingot | Titanium Ingots]], [[Brass Ingot | Brass Ingots]], [[Tungsten Carbide Ingot | Tungsten Carbide Ingots]], [[Platinum Ingot | Platinum Ingots]], [[Manganese Ingot | Manganese Ingots]], [[Aluminum Ingot | Aluminum Ingots]], [[Steel Ingot | Steel Ingots]], or [[Antimony-Lead Ingot || Antimony-Lead Ingots]].
+
The mold can be made using [[Bronze Ingot | Bronze Ingots]], [[Cobalt Ingot | Cobalt Ingots]], [[Stainless Steel Ingot | Stainless Steel Ingots]], [[Antimony Ingot | Antimony Ingots]], [[Nichrome Ingot | Nichrome Ingots]], [[Magnesium Ingot | Magnesium Ingots]], [[Nickel Ingot | Nickel Ingots]], [[Bismuth Ingot | Bismuth Ingot]], [[Tungsten Ingot | Tungsten Ingots]], [[Titanium Ingot | Titanium Ingots]], [[Brass Ingot | Brass Ingots]], [[Tungsten Carbide Ingot | Tungsten Carbide Ingots]], [[Platinum Ingot | Platinum Ingots]], [[Manganese Ingot | Manganese Ingots]], [[Aluminum Ingot | Aluminum Ingots]], [[Steel Ingot | Steel Ingots]], or [[Antimony-Lead Ingot | Antimony-Lead Ingots]].
  
Only one kind of ingot can be used at one time.
+
Only one kind of ingot can be used for each mold.
 
.
 
.
 
{| class="wikitable sortable collapsible"
 
{| class="wikitable sortable collapsible"

Latest revision as of 03:59, 6 December 2016

Description

Scuba fins allow you to swim faster while in water but make you walk much slower while on land.

These are the easiest scuba fins to make, but the lowest level of three levels of scuba fins. The other two levels are:
- Scuba Fins (Intermediate)
- Scuba Fins (Advanced)
These are made with higher level polymers.

The scuba fins are equipped in the boots slot in your inventory.

Recipes

The beginner scuba fins require natural rubber acquired from a Tree Tap, an Injection Molder, and a Machining Mill.

Injection Molder

The scuba fins are made by putting 16 Bags (PolyIsoPrene Pellets) into the hopper of the injection molder with a water bucket and a scuba fin mold, which is shown further below (see Machining Mill - Scuba Fins). .

Outputs Components Recipe
  • Scuba Fins (Beginner) Scuba Fins (Beginner)
Mold (Scuba Fins)
Bag (PolyIsoPrene Pellets)
16
Scuba Fins (Beginner)
Water Bucket
Fuel

Machining Mill

The mold can be made using Bronze Ingots, Cobalt Ingots, Stainless Steel Ingots, Antimony Ingots, Nichrome Ingots, Magnesium Ingots, Nickel Ingots, Bismuth Ingot, Tungsten Ingots, Titanium Ingots, Brass Ingots, Tungsten Carbide Ingots, Platinum Ingots, Manganese Ingots, Aluminum Ingots, Steel Ingots, or Antimony-Lead Ingots.

Only one kind of ingot can be used for each mold. .

Outputs Components Recipe
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Bronze Ingot
Mold (Scuba Fins)
Water Bucket

Properties

Name Value
Polymer Pellets Bag (PolyIsoPrene Pellets)
Crafting Pellets 16
Crafting Duration (sec) 10
Max Stack Size 1
"VelocityInWater 0.2
VelocityOnGround 0.025
Durability(MCMins)" 20
Release Version 1.0.0

History

Gallery

Scuba fins.png

References