List of Rubbers

From PolyCraft World
Revision as of 03:14, 30 June 2015 by Wev012000 (Talk | contribs) (Description)

Jump to: navigation, search

Description

Rubbers are kinds of polymers that happen to be elastic (stretchy) at use temperatures. Thus out of the more than 100 polymers that Polycrafters can make, some of them (listed below) happen to be rubbers based on their materials properties. This page explains the kinds of rubbers that Polycrafters can make and why they are useful. In general rubbers can be used in the injection molder, the extruder and the crafting table to create a host of Polycraft items with exciting new and old functionalities.

Rubber Abbreviation Raw Material Tech Level Rating (Pressure, Toughness)
Natural Rubber NR Bag (PolyIsoPrene Pellets) 1 Low
Butyl Rubber BR Bag (Isobutylene-Isoprene Rubber Pellets) 5 Medium
Synthetic Rubber PBR (low grade) Bag (PolyButadiene (low-cis) Pellets) 5 Medium
Synthetic Rubber PBR (high grade) Bag (PolyButadiene (high-cis) Pellets) 5 Medium
Engineered Rubber SBR Bag (Styrene-Butadiene Rubber Pellets) 7 High
Engineered Rubber HBR Bag (Nitrile-Butadiene Rubber Pellets) 7 High
Engineered Rubber HNBR Bag (Hydrogenated Nitrile-Butadiene Rubber Pellets) 7 High
Extreme Rubber CIIR Bag (Chlorine Isobutylene-Isoprene Rubber Pellets) 8 Extreme
Extreme Rubber BIIR Bag (Bromine Isobutylene-Isoprene Rubber Pellets) 8 Extreme
Extreme Rubber EPDM Bag (Ethylene-Propylene-Diene Monomer Pellets) 8 Extreme
Extreme Rubber EVA Bag (Ethylene-Vinyl Acetate Pellets) 8 Extreme
Extreme Rubber PUR Bag (PolyUrethane Pellets) 8 Extreme


This page lists several (non-comprehensive) examples of rubber products. Each specific Polycraft Item page will detail the specifics. This page is meant as a guide to processing rubbers and in many cases, different types of rubbers or rubber products can be substituted into the recipes.

Grips

Outputs Components Recipe Inventory
Mold (Grip)
Bag (PolyIsoPrene Pellets)
4
Grip (Natural Rubber)
Water Bucket
Fuel

Shapeless
Diamond Axe
Grip (Natural Rubber)
Gripped Diamond Axe

Running Shoes

Running shoes (walker, jogger, and runner versions) are made from all classes of rubbers. Most shoes can be directly injection molded with the correct bags of pellets. Extreme rubbers take a few extra processing steps. First Polycrafters must injection mold different components of the shoes (insoles, midsoles and outsoles) from specific rubbers and combine them with engineering thermoplastics on the crafting table.

Outputs Components Recipe
Mold (Running Shoes)
Bag (Chlorine Isobutylene-Isoprene Rubber Pellets)
12
Running Shoes (Runner)
Water Bucket
Fuel

Rubber Sole (outsole)
Bag (PolyHexamethylene Adipamide Pellets)
Bag (PolyHexamethylene Adipamide Pellets)
Bag (PolyHexamethylene Adipamide Pellets)
Bag (PolyHexamethylene Adipamide Pellets)
Rubber Sole (insole)
Rubber Sole (midsole)
Running Shoes (Sprinter)

Scuba Gear

  • Scuba Fins (all classes)
  • Scuba Mask (all classes) - Note: Masks with Lights must be subsequently crafted
  • Gaskets (all classes)
  • Life Preserver (NR, SBR, EVA)

Hoses, Fibers, Tethers and Cords

  • Hose (all classes)
  • Fibers, Tethers and Cords (limited implementation as of version 1.1.2)
  • Rubber Armor of all kinds following standard crafting recipes with rubber pellets